Hoover Linx Vacuum Troubleshooting Guide

Battery Issues:

The Hoover Linx vacuum is powered by a rechargeable battery, and sometimes the battery can become depleted or fail to hold a charge. If you’ve been using your vacuum frequently, or if it’s been in storage for an extended period, the battery may be drained. Check the battery’s charge by plugging it into the charger and seeing if the indicator light comes on. If not, try using a different outlet to rule out an issue with the power source.

If the vacuum still doesn’t turn on, and the battery doesn’t seem to hold a charge, the battery may need replacement. A Hoover Linx replacement battery can be purchased directly from Hoover or from third-party retailers.

Power Switch:

It may sound simple, but sometimes the power switch isn’t fully engaged, or it could be faulty. Double-check the power switch to make sure it is fully pressed down or turned on. If the switch seems to be stuck or doesn’t respond, the switch itself might need to be repaired or replaced. Contact Hoover customer support or consult a service professional for further assistance.

Power Cord (for Corded Models):

If you have a corded Hoover Linx model, check the power cord for any visible signs of wear or damage. If there are cuts, frays, or exposed wires, the cord may be malfunctioning and could prevent the vacuum from turning on. Always unplug the vacuum before inspecting the cord and, if necessary, replace the damaged cord with a new one.

Circuit Breaker:

Some Hoover vacuums have an internal circuit breaker to protect the motor from overheating. If the vacuum has been running for an extended period, or if it has overheated, the breaker may trip, causing the vacuum to shut off. Unplug the vacuum, wait a few minutes, and plug it back in to reset the breaker. If this doesn’t work, there could be a deeper issue with the motor that may require professional repair.

Clogged Hose or Filters:

One of the most common reasons for reduced suction is a clogged hose or filter. Over time, debris, dust, and dirt can build up in the hose or filter, blocking airflow and reducing suction power. Check the hose for any visible blockages and clear them away. If the hose is twisted or kinked, straighten it out to allow for proper airflow.

The Hoover Linx also has a filter that traps dirt and dust. Over time, these filters can get clogged, reducing the vacuum’s suction. Refer to the vacuum’s user manual to locate the filter and clean it according to the manufacturer’s recommendations. Some filters may need to be replaced entirely if they have become too clogged or damaged.

Dirty Roller Brush:

Another common cause of suction loss is a clogged roller brush. Hair, string, and other debris can wrap around the roller, reducing its effectiveness and making it harder to pick up dirt. Turn off the vacuum and carefully remove the roller brush from its housing. Use scissors or your hands to remove any tangled debris, hair, or fibers. If the roller brush is heavily worn or damaged, you may need to replace it.

Full Dustbin:

Most vacuums, including the Hoover Linx, feature a dustbin that collects dirt and debris. If the dustbin becomes too full, it can obstruct airflow and reduce suction. Make it a habit to empty the dustbin after each use to maintain the vacuum’s suction power. If the dustbin is not emptied frequently, it may also be harder to clean thoroughly, so make sure to wash it regularly if the manufacturer recommends it.

Clogged Hose or Nozzle:

A blocked hose or nozzle can cause a vacuum to make strange noises, including high-pitched whistling sounds or vibrations. Inspect the hose for any visible blockages, such as hair or large pieces of debris, and clear them away. You should also check the nozzle to ensure it’s free from any blockages.

Roller Brush:

If the roller brush is clogged or damaged, it may produce a loud, grinding noise. Hair and debris often get tangled around the roller, causing it to stop spinning or make loud noises. Turn off the vacuum and carefully inspect the roller brush. Remove any tangles and ensure the brush is rotating freely. If the brush is damaged, you may need to replace it.

Loose Parts:

Loose parts on your Hoover Linx vacuum could create unwanted noise during use. Check the vacuum’s hose, nozzle, and vacuum head to ensure they are securely attached. Tighten any loose connections and reassemble the parts as needed. If the vacuum head is loose, the noise could also come from an imbalanced part that is rattling as it moves across the floor.

Charger Issues:

First, inspect the charger to ensure it is properly connected to the vacuum. Try using a different electrical outlet to see if that resolves the issue. Sometimes, the charging port on the vacuum or the charger itself can wear out over time, preventing the vacuum from charging. If you notice any visible damage to the charger or charging port, you may need to replace the charger or the port.

Battery Aging:

Like all rechargeable batteries, the one in your Hoover Linx will degrade over time. If your battery is several years old, it may no longer hold a charge as well as it did when the vacuum was new. In this case, you may need to replace the battery to restore the vacuum’s performance. Hoover provides replacement batteries for their Linx models, or you can opt for a third-party replacement if desired.

Incorrect Height Setting:

Many Hoover Linx vacuums come with an adjustable height setting for different types of flooring. If you have it set too high for a carpeted surface or too low for a hard floor, it may not pick up dirt effectively. Make sure the height setting is adjusted correctly based on the type of floor you are vacuuming. If the setting is incorrect, the vacuum may not make adequate contact with the floor, reducing its ability to pick up dirt.

Full or Dirty Filter:

Dirty or clogged filters can significantly reduce a vacuum’s suction power. Hoover Linx vacuums have filters that need regular cleaning to ensure optimal performance. Follow the manufacturer’s instructions on how to clean or replace the filter. Make sure the filter is completely dry before reinserting it back into the vacuum.

Blockage:

Hair, string, or other debris can become tangled in the brushroll, causing it to stop spinning. Turn off the vacuum and check the brushroll for any obstructions. Remove any debris or hair that may be wrapped around the roller. This should help restore the brushroll’s spinning ability.

Faulty Belt:

The belt that drives the brushroll can wear out or break over time. If the belt is damaged, the brushroll won’t spin. If you suspect the belt is the issue, consult the user manual for instructions on how to replace the belt yourself, or you can take the vacuum to a repair professional.

Motor Issues:

If the motor that drives the brushroll is malfunctioning, it may need repair or replacement. This is a more complex issue that may require professional repair. Contact Hoover customer service or visit a service center for assistance.

Clogged Filters or Hoses:

When filters or hoses are clogged, airflow is restricted, and this can cause the vacuum to overheat. Regularly check the filters and hoses for any blockages and clean them as needed. Make sure to follow the manufacturer’s cleaning guidelines for best results.

Extended Use:

Vacuuming for long periods without breaks can cause the vacuum motor to overheat. It’s a good idea to take short breaks if you are vacuuming for extended periods. Allow the motor to cool down to prevent any damage.